Cetakan wastafel BMC
According to the specific special varieties, there are winding resins, spray resins, RTM resins, pultrusion resins, SMC, BMC resins, flame-retardant resins, food-grade resins, anti-corrosion resins, air-drying resins, Polyboard resins, handicraft resins, Button resin, agate resin, artificial stone resin, highly transparent resin crystal resin, putty resin, dll .
- Pengiriman Cepat
- Kualitas asuransi
- Layanan Pelanggan 24/7
perkenalan produk
Desain cetakan wastafel BMC
Desain Struktural:Penting untuk merancang sesuai dengan bentuk, ukuran dan fungsi wastafel, termasuk menentukan permukaan perpisahan, tata letak rongga, mode demoulding, dll . misalnya, untuk wastafel bentuk yang kompleks, mungkin perlu untuk mengadopsi desain permukaan multi-partai untuk memastikan penurunan wastafel yang halus; Untuk memastikan akurasi dimensi dan kualitas permukaan wastafel, akurasi pemesinan rongga harus lebih tinggi, dan toleransi dimensi biasanya dapat dikontrol dalam ± 0 . 05mm.
Proses pembuatan
To use CNC machining center for precision machining, can ensure the dimensional accuracy and surface quality of the mold. For some complex shapes and structures, it may also be necessary to combine special processing methods such as EDM and wire-cutting. For example, the inner surface of the sink mold needs to be finely machined, and the surface roughness can reach Ra 0.8- ra1 . 6μm untuk memastikan kualitas penampilan wastafel setelah pencetakan.
Majelis dan debugging:After the mold processing is completed, it is necessary to carry out strict assembly and debugging. During the assembly process, it is necessary to ensure the installation accuracy of each component, such as the clearance between the core and the cavity should be controlled between 0.05-0.1mm. In the debugging stage, the molding effect of the mold is checked by testing the mold, and the problems found are disesuaikan dan dioptimalkan dalam waktu .
Proses cetakan
Temperature control: The molding temperature of BMC material is generally between 130-150℃C, and the mold temperature should be controlled at about 120-140℃C to ensure that the curing reaction of the material can proceed smoothly. In the molding process, the mold is heated by the heating system, and the temperature sensor is used to monitor and control the mold temperature in real time, and the temperature fluctuation range can be controlled within ± 5 derajat 4.
Tag populer: Cetakan wastafel BMC, produsen cetakan wastafel bmc, pabrik, cetakan BMC untuk benang eksternal, cetakan BMC untuk tekstur permukaan, cetakan BMC untuk cetakan kelas farmasi, cetakan BMC untuk cetakan ruang bersih semikonduktor, cetakan BMC untuk bagian berdinding tipis, cetakan BMC untuk lubang
